ADVANCED WATER AND WASTEWATER TREATMENT - 2017/8
Module code: ENG3204
Civil and Environmental Engineering
OUKI SK Dr (Civl Env Eng)
Number of Credits
FHEQ Level 6
Module cap (Maximum number of students)
Overall student workload
Workshop Hours: 3
Independent Study Hours: 120
Lecture Hours: 24
|Assessment type||Unit of assessment||Weighting|
|Examination||EXAMINATION (2 HOURS)||70|
|Coursework||COURSEWORK: PART A: CASE STUDY REPORT (20%); PART B CASE PRESENTATIONS (10%)||30|
Alternative Assessment: Alternative assessment for the oral presentation of courseworkwill be delivered by students in the presence of the module delivery organiser in an office environment or via Skype if more convenient.
Prerequisites / Co-requisites
Completion of the normal progression requirements from FHEQ Level 5 on a degree course in Civil Engineering
The module introduces students to advanced water and wastewater treatment and reuse technologies and principles. The potential for water and material recycling and recovery via the use of sustainable treatment techniques will be introduced with the aim to minimise waste production and maximise water and material reuse. Some process design concepts will be introduced for those technologies that have more potential for wider practical applications. The module will build upon the information about the concepts and theory of conventional water and wastewater treatment introduced during the module on Environmental Engineering and Hydrology (ENG3177).
To introduce students to the fundamentals and principles of advanced water and wastewater treatment and reuse technologies, that have potential for water reuse, material recovery and waste minimisation.
The students will be provided with the knowledge required for them to be able to select the most appropriate and sustainable treatment techniques for a particular wastewater stream.
They will also be able to design a selection of treatment processes that have wider practical applications.
When designing and selected treatment processes during the coursework they will be encouraged to consider multiple factors, including sustainability, the environment, public health and economics.
|Identify the sources and typical characteristics of municipal and industrial wastewater||KCT|
|Explain the principles of municipal and industrial wastewater treatment processes||KC|
|Compare and appraise conventional and advanced technologies associated with wastewater treatment and reuse||KCP|
|Appraise specific pollution problems associated with sludge treatment and disposal with an emphasis on beneficial reuse||KCT|
|Evaluate the concept of water and waste recycling and reuse when selecting treatment options with an emphasis on closed-loop treatment processes rather than end of pipe||KCP|
|Design a selection of wastewater treatment processes||KCPT|
|Select suitable processes for a given wastewater type based on a consideration of economics, treated water quality, public health and sustainability||KCPT|
|Risk identification & mitigation||T|
|Synthesis of data||T|
|Use of computers, spreadsheets||T|
|Independent learning skills||T|
C - Cognitive/analytical
K - Subject knowledge
T - Transferable skills
P - Professional/Practical skills
Introduction to wastewater treatment
Characteristics of municipal wastewater and industrial effluent.
Purpose of conventional and advanced processes.
Conventional wastewater treatment (limited potential for recycling/reuse)
Biological treatment processes
Aerobic/anaerobic digestion (introduce design concepts)
Membrane bioreactors (MBRs) and Upflow sludge blanket filtration (USBF) or rotating biological contactors (RBCs)
Advanced wastewater treatment processes (emphasis on resuse of resources)
Activated carbon adsorption (introduce design concepts)
Membrane separation techniques (reverse osmosis)
Sludge treatment for reuse
Chemical oxidation and disinfection processes
byproduct formation and control.
Pesticides and herbicides
pharmaceuticals, endocrine disrupting chemicals
advanced oxidation processes.
Future of water and wastewater treatment
Current issues: energy and chemicals consumption, climate change, population growth, water stress.
Possible solutions: water reuse and recycling, decentralised treatment, catchment management.
Methods of Teaching / Learning
The learning and teaching strategy for this part of the module is designed to introduce students to fundamental and advanced wastewater and waste treatment and reuse technologies and principles. The potential for water and material resource recovery via the use of sustainable treatment techniques will be introduced with the aim to minimise waste production and maximise water and material reuse. Some process design concepts will be introduced for those technologies that have more potential for wider practical applications. Students will be encouraged to consider multiple factors, including sustainability, the environment, public health and economics, when undertaking case studies for coursework.
The learning and teaching methods include:
One session on “Introduction to Water and Wastewater treatment” (3 h).
Two sessions on “Biological Treatment Processes” (6 h).
Two sessions on “Physical and Chemical Processes” (6 h).
One session on “Chemical Oxidation and Disinfection Processes” (3 h).
One session on “Emerging pollutants” (3 h)
One session on the “Future of Water and Wastewater Treatment” (3 h).
A site visit to a wastewater treatment plant (3h)
Case studies presentations (3h)
All these sessions will be lectures containing tutorial-style questions which help the students to apply the associated theory and concepts.
In addition, there will be a piece of coursework (40 h) where the students work on case studies about a water or wastewater treatment topic of their choice. These case studies will involve a consideration of water and wastewater recycling and/or sustainability.
The students giving presentations about their case studies and receiving feedback (3 h).
Independent learning (72 h) will also be required by the module.
The assessment strategy is designed to provide students with the opportunity to:
Explain the principles of municipal and industrial wastewater treatment processes (LO:1,2,3)
Compare and appraise conventional and advanced technologies associated with wastewater & waste treatment and reuse (LO:4,5,6,7)
Evaluate the concepts of sustainability and reuse when selecting treatment options, with an emphasis on closed-loop treatment processes rather than end of pipe (LO:5,6,7)
The summative assessment for this module consists of:
Coursework: case study report (20%) and associated presentation (10%) [Learning outcomes assessed:1,3-7,a,b,h-j,l,n,o] (30%, 40 hours)
Examination [learning outcome: 1-7;b-e,g,i] (70%, 2 hours)
Formative assessment and feedback
Formative assessment, in the form of a comments and (where appropriate) worked solutions, will be through a range of exercises during the lecture and tutorial sessions. The coursework will also provide a vehicle for formative feedback both written (and returned with the coursework submission) and verbally (during a debrief session).
Reading list for ADVANCED WATER AND WASTEWATER TREATMENT : http://aspire.surrey.ac.uk/modules/eng3204
Programmes this module appears in
|Civil Engineering MEng||2||Optional||A weighted aggregate mark of 40% is required to pass the module|
|Civil Engineering BEng (Hons)||2||Optional||A weighted aggregate mark of 40% is required to pass the module|
|Liberal Arts and Sciences BA (Hons)/BSc (Hons)||2||Optional||A weighted aggregate mark of 40% is required to pass the module|
Please note that the information detailed within this record is accurate at the time of publishing and may be subject to change. This record contains information for the most up to date version of the programme / module for the 2017/8 academic year.