ADVANCED CHEMICAL AND PETROCHEMICAL REACTION ENGINEERING - 2018/9
Module code: ENG3200
This module provides students with the knowledge and skills to complete chemical reaction engineering analysis on both catalytic and fluid-solid reactors when applied in petrochemical processing. The students will acquire knowledge about different heterogeneous reactor configurations and be able to apply chemical engineering principles to model kinetic behaviour applicable to reaction engineering.
Chemical and Process Engineering
ALPAY E Prof (Chm Proc Eng)
Number of Credits: 15
ECTS Credits: 7.5
Framework: FHEQ Level 6
JACs code: H800
Module cap (Maximum number of students): N/A
Prerequisites / Co-requisites
Completion of the progression requirements to FHEQ Level 6 of degree courses in Chemical and Petroleum Engineering. Qualifying Conditions: A weighted aggregate mark of 40% is required to pass the module.
Indicative content includes:
Transport Processes in Heterogeneous Catalysis
Interfacial and intra-particle gradient effects
Fixed Bed Catalytic Reactor Design
Pseudo-homogeneous and heterogeneous models
Fluidised Bed and Transport Reactors
Two and three-phase models; transport reactors
General design and simplifications
Non-Catalytic Fluid-Solid Reactions
Particle dissolution and shrinking core models.
Industrial Reactor Case Studies
e.g. bio-reactors; polymer reaction engineering; structured reactors
Reaction mechanisms and operating conditions for
1) Treatment processes, e.g. hydrotreating (including amine treatment and sulphur recovery), naphtha reforming
2) Conversion processes, e.g. catalytic cracking, thermal cracking and coking
3) Gasoline production, e.g. alkylation, isomerisation, blending
Reaction mechanisms and operating conditions for
1) Steam cracking for light olefins
2) Olefins and aromatics polymerisation
|Assessment type||Unit of assessment||Weighting|
Class tests and coursework Equivalent assessments will be made available. Examination Resit paper
The assessment strategy is designed to meet the learning outcomes.
Thus, the summative assessment for this module consists of:
Collaborative coursework on heterogeneous reactors with individual submission – 20% (2 elements, 10% each), (LO1, LO2, LO3, LO4, LO5)
Examination – 80%, (LO1, LO2, LO3, LO4, LO5, LO6), as per ENG3184 but to include a section on petrochemical reaction engineering
Formative assessment and feedback.
There is no formal formative assessment, however students will receive formative feedback throughout the module, including:
Each week a tutorial session will follow the format of problems based on the recent lecture material
In the tutorial sessions formative feedback on problems will be provided, including problems covered in lectures.
Feedback session following each assessment
Feedback to specific queries via email, with responses being made available to all via SurreyLearn
- This module aims to further students’ understanding of chemical reaction engineering, relating specifically to the two main areas of heterogeneous non-catalytic reactors, heterogeneous catalytic reactors and their application to petrochemical processing.
|001||Explain the mechanisms which occur in heterogeneous catalytic and non-catalytic reactors.||KC|
|002||Recognise the rate limiting factor for both catalytic and non-catalytic heterogeneous reactors.||KCP|
|003||Derive from first principles kinetic expressions and concentration profile expressions for catalytic and non-catalytic heterogeneous reactors.||KC|
|004||Discuss the analytical and experimental techniques for the characterisation of various reactors and reactor elements in chemical and petrochemical engineering.||KCP|
|005||Evaluate the reactor characteristics in heterogeneous catalytic and non-catalytic reactors.||KCP|
|006||Analyse and critically discuss the operation of some of the thermal and catalytic reaction processes applied in the refining and petrochemical industries.||KCP|
C - Cognitive/analytical
K - Subject knowledge
T - Transferable skills
P - Professional/Practical skills
Overall student workload
Independent Study Hours: 106
Lecture Hours: 30
Tutorial Hours: 14
Methods of Teaching / Learning
The learning and teaching strategy is designed to help students:
Describe and give examples for the use of heterogeneous reactors in the chemical and petrochemical industries
Develop skills to derive kinetic expressions from engineering first principles.
Identify appropriate design equations to apply for reactor evaluation
Students will have lectures and tutorials to provide them with the basic appreciation of the key chemical engineering concepts applicable to heterogeneous reaction engineering. Worked examples in lectures and tutorials will give students the opportunity to place their learning in context.
The learning and teaching methods include:
Lectures – 3 hours per week for 9 weeks, followed by 1 hour per week for 3 weeks
Tutorials – 11 hours of tutorials
6 hours of equivalent lectures to be through online learning resources
Indicated Lecture Hours (which may also include seminars, tutorials, workshops and other contact time) are approximate and may include in-class tests where one or more of these are an assessment on the module. In-class tests are scheduled/organised separately to taught content and will be published on to student personal timetables, where they apply to taken modules, as soon as they are finalised by central administration. This will usually be after the initial publication of the teaching timetable for the relevant semester.
Reading list for ADVANCED CHEMICAL AND PETROCHEMICAL REACTION ENGINEERING : http://aspire.surrey.ac.uk/modules/eng3200
Programmes this module appears in
Please note that the information detailed within this record is accurate at the time of publishing and may be subject to change. This record contains information for the most up to date version of the programme / module for the 2018/9 academic year.