BATTERIES, FUEL CELLS, AND SUPERCAPACITOR TECHNOLOGIES - 2022/3
Module code: ENGM288
In light of the Covid-19 pandemic the University has revised its courses to incorporate the ‘Hybrid Learning Experience’ in a departure from previous academic years and previously published information. The University has changed the delivery (and in some cases the content) of its programmes. Further information on the general principles of hybrid learning can be found at: Hybrid learning experience | University of Surrey.
We have updated key module information regarding the pattern of assessment and overall student workload to inform student module choices. We are currently working on bringing remaining published information up to date to reflect current practice in time for the start of the academic year 2021/22.
This means that some information within the programme and module catalogue will be subject to change. Current students are invited to contact their Programme Leader or Academic Hive with any questions relating to the information available.
Batteries, fuel cells, and supercapacitor are important electrochemical devices used as the power sources for a range of applications such as electric cars, power backup, portable electronic devices (e.g. laptops, e-pads, and mobile phones), etc. Many major cities around the world has set to ban the use of diesel and petrol cars in close future to reduce the illegal levels of air pollutions. Along this, the low efficiency associated with the current energy conversion techniques based on fossil fuels (e.g. combustion engines and gas turbines) has caused a great interests in using the alternative power sources. In this module, the students will learn the principles of modern electrochemical energy technologies and their applications in portable electronics, vehicle propulsion, and grid storage. Starting from the thermodynamic principles of electrochemical reactions and energy conversion, a knowledge in depth of selection, design, and applications of batteries, fuel cells, and supercapacitors will be covered in this module.
Chemical and Process Engineering
AMINI HORRI Bahman (Chm Proc Eng)
Number of Credits: 15
ECTS Credits: 7.5
Framework: FHEQ Level 7
JACs code: H631
Module cap (Maximum number of students): N/A
Overall student workload
Independent Learning Hours: 117
Lecture Hours: 35
Prerequisites / Co-requisites
Academic background in Engineering and Science (Chemistry and Physics)
Indicative content includes:
Chapter 1: Fundamentals of Electrochemical Energy Storage and Power Sources
Introduction to electrochemical energy storage; thermodynamic aspects; electrochemical cell, electrochemical series of metals, and equilibrium cell voltage; overpotential and cell resistance; charging and discharging, effect of concentration, temperature, and pressure on cell performance; cell characteristic curves and EIS
Chapter 2: Batteries Technology and Engineering
Theoretical background, type of batteries, selection and design; performance characteristics and evaluations; applications; charging/discharging; modeling of batteries
Chapter 3: Supercapacitors Technology and Applications
Fundamentals of electric capacitors; dielectric polarization mechanisms and materials; supercapacitor design, fabrication, and operation; characterisation, performance, and applications of supercapacitors; coupling with batteries and fuel cells
Chapter 4: Fuel Cells Engineering and Technology Development
Basic principles and thermodynamics of fuel cells; type of fuel cells; electrocatalysis of fuel, characterisation and performance analysis; fuel cell technology, systems, and design aspects; applications and economical evaluations
Chapter 5: Electric Vehicles
Technology of electric vehicles , types of batteries for electric vehicles; vehicle requirements and battery design, battery control and management, battery efficiency, performance, and degradation;
Chapter 6: Hybrid Systems
Introduction to hybrid electric vehicles, concept of hybrid electric drive trains and design, fuel cell battery-coupled hybrid electric buses and trains
|Assessment type||Unit of assessment||Weighting|
|Coursework||COURSEWORK (ESSAY ON A SELECTED TOPIC RELATED TO THE ELECTROCHEMICAL SYSTEMS)||40|
|Examination||EXAMINATION (2 HOURS)||60|
The assessment strategy is designed to provide students with the opportunity to demonstrate
- Understanding of engineering aspects and technological principles of electrochemical energy storage systems and power systems
- Capability to evaluate the performance and energy efficiency of the electrochemical energy systems through characteristic curves
- Applying the quantitative analysis methods for sizing and estimating the power requirements for advanced energy systems such as electric vehicles and hybrid systems
Thus, the summative assessment for this module consists of:
- Coursework – 40%, 15 hrs (LOs 1, 2, 3, 4)
- Examination – 60%, 2 hrs (LOs 1, 2, 3)
Note: A weighted aggregate mark of 40% is required to pass every single unit of assessment for the module
- Formative verbal feedback is given during in-class problem solving and discussion sessions.
- Formative feedback on coursework is given verbally and available on SurreyLearn to provide feedback on understanding of the electrochemical energy systems and respective problem formulation and solution.
- • Provide an overview of the common electrochemical energy storage/conversion systems and their efficiency analyse as power storage/generation technology
- • Develop the basic understanding of the theory and practice of batteries, fuel cells, and supercapacitors as the major electrochemical power sources
- • Develop the students’ knowledge to analyse and design the electrochemical energy storage/conversion processes with figuring out the overal performance and efficiency of the energy systems
- • Provide the advanced knowledge and practical skills required for a professional career in the electrochemical energy industry espeially the research and development centres focusing on advanced alternative energy technologies
|001||1. Understand the engineering aspects and technological principles of electrochemical energy storage systems and power sources||KPT|
|002||2. Evaluate the state-of-the-art electrochemical energy storage systems using quantitative analysis methods for sizing and estimating the power requirements for energy systems.||CKT|
|003||3. Demonstrate an in-depth knowledge to apply the principles of the electrochemical energy conversion for analysing the energy requirements for electric vehicles and hybrid energy systems||CKP|
|004||4. Understand and figure out the developments and requirements for future of energy storage technologies||CKPT|
C - Cognitive/analytical
K - Subject knowledge
T - Transferable skills
P - Professional/Practical skills
Methods of Teaching / Learning
The learning and teaching strategy is designed to:
- Introduce thermodynamic principles and technical aspects of the major electrochemical energy storage and power sources.
- Represent different class of the electrochemical systems such as batteries, fuel cells, and supercapacitors by providing the relevant characteristics curves and quantitative analysis methods for estimating the systems efficiencies and performances through examples, problems, and exercises especially for emerging technologies such as electric vehicles and hybrid systems. The module will be delivered through lectures and in-class problem solving, as well as group discussions within the class.
The learning and teaching methods include:
- 3 hours lecture per week x 11 weeks
- 2 hours revision lectures
Indicated Lecture Hours (which may also include seminars, tutorials, workshops and other contact time) are approximate and may include in-class tests where one or more of these are an assessment on the module. In-class tests are scheduled/organised separately to taught content and will be published on to student personal timetables, where they apply to taken modules, as soon as they are finalised by central administration. This will usually be after the initial publication of the teaching timetable for the relevant semester.
Upon accessing the reading list, please search for the module using the module code: ENGM288
Please note that the information detailed within this record is accurate at the time of publishing and may be subject to change. This record contains information for the most up to date version of the programme / module for the 2022/3 academic year.