RF SYSTEMS AND CIRCUIT DESIGN - 2023/4
Module code: EEEM044
IMPORTANT: The second assessment pattern (100% Weighting) is only applicable to the MSc Short Course Students
Expected prior learning: EEE3033 – RF and Microwave Fundamentals, or equivalent learning.
Module purpose: Advanced communications systems and radar operate at RF and microwave frequencies. The design principles and circuit operation, underlying these systems, are quite different from those of electronics used in signal processing at baseband frequencies. This module will cover the key elements of RF and microwave system design as well as analysis concepts for a range of commonly used active circuits, including: oscillators, frequency synthesisers, amplifiers and mixers. The module will also cover the circuit design and operation of non-linear devices used in active circuits together with deployment considerations. This module will include and build on many of the concepts studied in EEE3033 RF and Microwave Fundamentals and address further advanced features of non linear RF devices and system optimisation. It is complementary to EEEM064 Microwave Design Techniques and also EEEM006 Antennas and Propagation.
Computer Science and Electronic Eng
BROWN Tim (CS & EE)
Number of Credits: 15
ECTS Credits: 7.5
Framework: FHEQ Level 7
JACs code: H651
Module cap (Maximum number of students): N/A
Overall student workload
Independent Learning Hours: 42
Lecture Hours: 30
Laboratory Hours: 3
Guided Learning: 30
Captured Content: 45
Prerequisites / Co-requisites
Indicative content includes the following:
- Revision of prerequisite background material, including: S-parameters, decibel scale, transmission line theory, smith charts.
- Functionality and structure of RF non-linear circuit components, including: diodes, and field effect transistors.
- RF power amplifier performance, analysis, and design, including: amplifier classes, amplifier stability, non-linearity, intermodulation distortion, adjacent channel interference.
- Oscillator circuit design and operation, including: feedback loops, frequency synthesis, phase noise.
- Single balanced and double balanced active and passive mixer circuit design.
- Role of mixers in RF systems, including up conversion, down conversion.
- RF system considerations, including: dynamic range, link budget analysis, and noise figure calculations.
- Microwave integrated circuits; role, applications, and technology overview.
- RF test and measurement, including: spectrum analysers and network analysers.
- Computer aided RF circuit design laboratories.
|Assessment type||Unit of assessment||Weighting|
|Examination||Examination - 2 hours||100|
The assessment strategy for this module is designed to provide students with the opportunity to demonstrate their competence in using fundamentals of RF electronics and applying them to real life problem solving scenarios. This is achieved in part through a computer aided design laboratory (CAD) assessment which the student is required to document in a professional manner.
Thus, the summative assessment for this module consists of the following.
- A computer aided design (CAD) laboratory assignment, which follows three weeks of preparation in supervised laboratory sessions. This is weighted to 20% of the final mark.
- Closed book written examination, 2 hours in which students have a choice of three questions out of four available questions. This is weighted to 80% of the final mark.
Any deadline given here is indicative. For confirmation of exact date and time, please check the assessment calendar issued to you.
- NB: For those studying the 1P version of the module on MSc Electronic Engineering (by short course), the closed book written examination, 2 hours long, is weighted as 100% of the final mark.
Formative assessment and feedback
For the module, students will receive formative assessment/feedback in the following ways:
- During lectures, by question and answer sessions.
- During lectures, by peer instruction (subject to a large enough class size).
- During tutorials/tutorial classes.
- During supervised computer laboratory sessions.
- Via assessed coursework.
- To provide a foundation of knowledge and understanding in the area of active microwave circuit and systems design.
- The module also aims to provide opportunities for students to learn about the Surrey Pillars listed below.
|001||Demonstrate knowledge of how to apply RF systems and circuit design concepts in existing and future radio technologies, including use of S-parameters and the decibel scale.||KC||M1, M6|
|003||Be able to design and analyse circuits containing active non-linear components most commonly used in active RF devices.||CPT||M5|
|004||Understand how to use and apply data measured with RF test and measurement equipment including network analysers and spectrum analysers.||CPT||M4, M12|
|002||Recognise commonly used active RF devices and know how to integrate them into systems.||KC||M2, M6|
|005||Apply circuit and system design within a computer aided design (CAD) simulation and report the outcomes in written form.||KCPT||M3, M16, M17|
C - Cognitive/analytical
K - Subject knowledge
T - Transferable skills
P - Professional/Practical skills
Methods of Teaching / Learning
The learning and teaching strategy is designed to achieve the following aims:
- To build on and extend knowledge of measurement parameters used in radio frequency (RF) electronics including scattering parameters, link budgets, the decibel scale and amplifier characteristics.
- By using knowledge of measurement parameters, to then determine the capabilities of RF devices in how they support better efficient sustainable systems, while showing actively how to use such knowledge in circuit and system design as real life problem solving.
- To gain competence in RF simulation and test and measurement through which demonstration of knowledge and its use will be evidenced in the assignment tasks set from completing the laboratories.
Learning and teaching methods include the following:
EEEM044 – Short Course Version
- Short course delivery, 33 hours x 1 week.
- Distance learning study, materials provided after course.
- Ad-hoc tutorials to be arranged in person or online with module leader.
EEEM044 – Standard Version
- Laboratory demonstrations
- Taught material online is provided for each of the weeks where the seminars and laboratory demos occur
- Computer based laboratory sessions. The computer based laboratory sessions will provide an opportunity for the students to learn how to use computer aided design (CAD) software
Indicated Lecture Hours (which may also include seminars, tutorials, workshops and other contact time) are approximate and may include in-class tests where one or more of these are an assessment on the module. In-class tests are scheduled/organised separately to taught content and will be published on to student personal timetables, where they apply to taken modules, as soon as they are finalised by central administration. This will usually be after the initial publication of the teaching timetable for the relevant semester.
Upon accessing the reading list, please search for the module using the module code: EEEM044
Sustainability – The design of RF power amplifiers to be efficient and cost effective in their increasingly dense deployment for communications is essential. Students will study the different classes of amplifier and how they can improve efficiency in digital communication systems to support sustainable cities and communities. Overall system efficiency can provide opportunities for self sustaining radio deployments forming usage of cleaner energy solutions.
Digital capabilities – RF engineering requires competence in using design simulators. In this module there are laboratories dedicated to using the Advanced Design System (ADS) which is a state of the art RF design tool. Students will have opportunity to learn the detail of optimising both passive and active circuits and using the Smith chart, as an important design tool for RF engineers used here in a digital form within the simulator.
Employability – Students will learn competencies in many important parameters and ‘bread and butter’ that is applicable to RF test and measurement including use of the decibel scale, scattering parameters, Smith charts and phase noise in order to quantify them on a spectrum analyser. These are key competences for any proficient RF engineer in an employment setting while also this will link together with an ability to apply knowledge of the circuit design of RF active devices to system design and evaluation.
Resourcefulness and resilience – Students will build competence in the knowledge of RF systems and circuits in order to apply these to design and problem solving in the assessment. The written exam will be set specific design tasks both in RF circuits and systems. The assignment will require successful completion of simulations in the laboratories, which will then involve using important complex parameters to interpret system performance and compliance. Advanced learning of the module will enable students to interpret how or why an RF system may or will go wrong and by what means.
Programmes this module appears in
|Electronic Engineering (by short course) MSc(EEE SHORT COURSES OPTIONAL)||1||Optional||A weighted aggregate mark of 50% is required to pass the module|
Please note that the information detailed within this record is accurate at the time of publishing and may be subject to change. This record contains information for the most up to date version of the programme / module for the 2023/4 academic year.