# FLUID MECHANICS & THERMODYNAMICS 2 - 2020/1

Module code: ENG2089

Module Overview

The FHEQ Level 5 treatment of thermofluids builds on the material taught at FHEQ Level 4. It is presented in three linked sections: Thermodynamics, Heat Transfer and Fluid Mechanics.

The **Thermodynamics** section introduces the second law of thermodynamics, entropy and associated concepts. These are used in understanding cycles and processes, and consideration of common engine cycles.

The **Heat Transfer **section gives a solid grounding in aspects of heat transfer that are essential for engineers. It covers fundamental transfer mechanisms for steady state problems. Heat transfer coefficient evaluation and pipe flow problems are considered. Heat exchanger design and simple radiation exchange problems are introduced.

The **Fluid Mechanics **section considers incompressible, inviscid and viscous flow, and introduces compressible flow. Boundary layer theory is related to external flow around streamlined bodies, such as cars and aeroplanes in high Reynolds number flows. Bluff bodies with flow separation are also considered. Compressible flow theory is related to aerospace and other applications where flow velocities are high and fluid density changes become significant.

Module provider

Mechanical Engineering Sciences

Module Leader

CHEW John (Mech Eng Sci)

Number of Credits: 15

ECTS Credits: 7.5

Framework: FHEQ Level 5

JACs code: H141

Module cap (Maximum number of students): N/A

Module Availability

Semester 1

Prerequisites / Co-requisites

ENG1062 Fluid Mechanics & Thermodynamics 1

Module content

Indicative content includes:

Fundamentals: Further treatment of Laws of Thermodynamics, principally the second law, and its corollaries. Irreversibility. Perfect gases and perfect gas processes.

Reciprocating Engine Cycles: Analysis of air standard cycles for reciprocating engines: Otto, Diesel, dual. Cycle efficiency.

Gas Turbine Cycles: Cycles of steady flow processes - gas turbine cycle, jet engine. Thermal efficiency, net specific work output and work ratio.

Heat Transfer: Introduction to heat transfer, temperature driving force, overall and film heat transfer coefficients, log mean temperature, and thermal resistance; double pipe and more complex heat exchangers; steady state heat conduction; convection mechanisms, thermal boundary layers, dimensionless numbers and HTC correlations; radiation mechanisms, total enclosure, basic radiation exchange calculations.

External viscous and inviscid flow (incompressible): Streamlines, pressure drag and viscous drag, boundary layer flow for a flat plate, reference to continuity and Navier-Stokes equations as exact equations, boundary conditions.

Compressible inviscid flow: general description of sub and supersonic flow; Bernoulli's equation, stagnation pressure, energy and stagnation temperature; isentropic flow in convergent and divergent ducts, and choking; description of over and under-expansion, and shock waves.

Assessment pattern

Assessment type | Unit of assessment | Weighting |
---|---|---|

School-timetabled exam/test | IN-SEMESTER TEST | 20 |

Examination | EXAMINATION (2 HOURS) | 80 |

Alternative Assessment

Coursework replaces class tests.

Assessment Strategy

The __assessment strategy__ is designed to provide students with the opportunity to demonstrate understanding of scientific principles, methodologies and mathematics methods as well as the ability to describe particular systems and processes. The unseen examination includes a range of questions testing the learning outcomes described above.

Thus, the __summative assessment__ for this module consists of:

- Examination Learning outcomes 1,2,3 {80%}
- In-semester test Part A Learning outcomes 1,2; Part B Learning outcomes 3 {20%}

__Formative assessment and feedback__

- Formative verbal feedback is given in tutorials.
- Written feedback is given on the class test.

Module aims

- Illustrate the need for a thorough understanding of thermodynamics and heat transfer in overcoming problems associated with global warming and energy supply
- Develop understanding of the second law of thermodynamics and its application to internal combustion gas power cycles
- Familiarise students with the mechanisms of heat transfer and with the basic approach to solving steady state heat transfer problems and design calculation methods for a range of heat exchanger types.
- Provide students with the ability to calculate the drag and heat transfer for flow over a flat plate
- Introduce compressible flow behaviour in converging and diverging nozzles.

Learning outcomes

Attributes Developed | ||
---|---|---|

001 | IMechE Specific Learning Outcome codes: SM1b/m, SM2 b/m, EA1b/m, EA2, EL4 On successful completion of the module, students will be able to: Appreciate the need for improved energy efficiency and the use of new fuels and alternative energy sources in order to reduce CO2 emissions and conserve energy resources (EL4) – K, C,P,T. | KCPT |

002 | Demonstrate a comprehensive understanding of thermo-fluid principles applied to various engine cycles, heat exchangers and fluid flows and predict system thermal efficiency; (SM1b/m, EA1b/m, EA2) | KC |

003 | Analyse heat transfer systems, boundary layer flows and simple compressible flows using analytical and modelling techniques; (SM2b/m, EA1b/m) | KC |

Attributes Developed

**C** - Cognitive/analytical

**K** - Subject knowledge

**T** - Transferable skills

**P** - Professional/Practical skills

Overall student workload

Independent Study Hours: 103

Lecture Hours: 36

Tutorial Hours: 11

Methods of Teaching / Learning

The __learning and teaching__ strategy is designed to:

Introduce thermo-fluid principles through theory with worked examples. This is delivered through lectures and tutorial classes. Tutorial questions complement the lecture material with students expected to attempt the tutorial questions following the lecture and obtain help and feedback during the tutorial sessions.

Practical laboratory experiments in module ENG2093 “Numerical and Experimental Methods” are designed to complement and reinforce the material presented in this module.

The __learning and teaching__ methods include:

- 3 hours lecture per week x 11 weeks
- 1 hour tutorial (in groups) x 11 weeks
- 3 hours revision lectures

Indicated Lecture Hours (which may also include seminars, tutorials, workshops and other contact time) are approximate and may include in-class tests where one or more of these are an assessment on the module. In-class tests are scheduled/organised separately to taught content and will be published on to student personal timetables, where they apply to taken modules, as soon as they are finalised by central administration. This will usually be after the initial publication of the teaching timetable for the relevant semester.

Reading list

Reading list for FLUID MECHANICS & THERMODYNAMICS 2 : http://aspire.surrey.ac.uk/modules/eng2089

Programmes this module appears in

Programme | Semester | Classification | Qualifying conditions |
---|---|---|---|

Aerospace Engineering BEng (Hons) | 1 | Compulsory | A weighted aggregate mark of 40% is required to pass the module |

Aerospace Engineering MEng | 1 | Compulsory | A weighted aggregate mark of 40% is required to pass the module |

Mechanical Engineering MEng | 1 | Compulsory | A weighted aggregate mark of 40% is required to pass the module |

Mechanical Engineering BEng (Hons) | 1 | Compulsory | A weighted aggregate mark of 40% is required to pass the module |

Automotive Engineering MEng | 1 | Compulsory | A weighted aggregate mark of 40% is required to pass the module |

Automotive Engineering BEng (Hons) | 1 | Compulsory | A weighted aggregate mark of 40% is required to pass the module |

Automotive Engineering (Dual degree with HIT) BEng (Hons) | 1 | Compulsory | A weighted aggregate mark of 40% is required to pass the module |

Please note that the information detailed within this record is accurate at the time of publishing and may be subject to change. This record contains information for the most up to date version of the programme / module for the 2020/1 academic year.