ELECTRICAL MACHINES AND POWER SYSTEMS - 2021/2
Module code: EEE3038
In light of the Covid-19 pandemic, and in a departure from previous academic years and previously published information, the University has had to change the delivery (and in some cases the content) of its programmes, together with certain University services and facilities for the academic year 2020/21.
These changes include the implementation of a hybrid teaching approach during 2020/21. Detailed information on all changes is available at: https://www.surrey.ac.uk/coronavirus/course-changes. This webpage sets out information relating to general University changes, and will also direct you to consider additional specific information relating to your chosen programme.
Prior to registering online, you must read this general information and all relevant additional programme specific information. By completing online registration, you acknowledge that you have read such content, and accept all such changes.
This module aims to introduce the operating principles of electrical machines used in the power stations. Further this module will cover to a greater depth the concept of power transmission using interconnected grid systems, overhead and underground power transmission and distribution systems.
Electrical and Electronic Engineering
UNDERWOOD Craig (Elec Elec En)
Number of Credits: 15
ECTS Credits: 7.5
Framework: FHEQ Level 6
JACs code: H600
Module cap (Maximum number of students): N/A
Prerequisites / Co-requisites
Advised pre-requisite: EEE2038 – Electronics IV: Electronics and Power Systems (5-epw), or equivalent learning.
Indicative content includes:
[1-2] AC generators: Introduction to alternators, Induced emf, Alternator on load, Synchronous reactance and voltage regulation, Parallel operation of two alternators and Design problems.
[3-4] Transformers: Operation of single phase transformer on no-load and load, Transformer with winding resistance and leakage resistance, Efficiency of a transformer, Parallel operation of single phase transformers, Introduction to three phase transformers and Design problems.
[5-6] Power system network: Structure of power system, Interconnected grid system, Comparison of AC and DC power transmission, Comparison of overhead and underground systems, Types of load, Load curves and Design problems.
[7-8] Overhead power transmission: Types of power transmission systems, Comparison of conductor materials, Selection of conductor size, Selection of transmission voltage and Design problems.
[9-10] Power Distribution Systems: Components of distribution system, Overhead and Underground system, Types of distribution systems, Selection and size of feeders, Introduction to DC and AC distribution systems and Design problems.
|Assessment type||Unit of assessment||Weighting|
|Coursework||DESIGN EXERCISE (MATLAB/SIMULINK)||20|
|Examination||2-HOUR, CLOSED BOOK WRITTEN EXAMINATION||80|
The assessment strategy is designed to provide students with the opportunity to demonstrate their analytical skills, background understanding of the subject, problem solving skills as well as identify any transferable skills that are relevant to the power industry.
Thus, the summative assessment for this module consists of:
2 hours exam that accounts for 80% of the assessment. The exam paper will be designed to test students’ theoretical knowledge as well as problem solving skills related to the learning outcomes of this module.
Coursework: MATLAB/Simulink Design Exercise that accounts for 20%. This allows students to apply their knowledge to a practical design problem.
Formative assessment and feedback
Students will get verbal feedback after each problem solving sessions/tutorials. They will also get feedback via the coursework assessment.
- introduce the key principles of electrical machines, power generation and transmission
- introduce the power distribution systems and interconnected grid systems.
- To provide practical design experience through MATLAB/Simlink simulation
|001||Explain the operation of AC generators and transformers and its applications for power systems||KC|
|002||Describe the basic operation of AC and DC power transmission and distribution systems||KC|
|003||Demonstrate an understanding of the operation of interconnected grid systems||KT|
|004||Compare the suitability of overhead and underground transmission systems||C|
|005||Apply the theoretical knowledge to workout design problems on power generation, transmission and distribution systems including by simulation||PT|
C - Cognitive/analytical
K - Subject knowledge
T - Transferable skills
P - Professional/Practical skills
Overall student workload
Independent Study Hours: 117
Lecture Hours: 30
Tutorial Hours: 3
Methods of Teaching / Learning
The learning and teaching strategy is designed to: include regular lectures from Week 1 to 10. These lectures will include the problem solving sessions (30 hours: 3 hours lecture/tutorial per week for 10 weeks). Three hours of revision will take place in Week 11. Lecture notes will be provided and students are expected to do independent learning in addition to attending lectures and tutorials. In addition, a MATLAB/Simulink exercise is included on microgrid power system design.
The learning and teaching methods include:
- 3 hours lecture per week x 10 weeks which includes class discussion and problem solving sessions.
- 3 hours in-class revision in Week 11.
- MATLAB/Simulink design exercise.
Indicated Lecture Hours (which may also include seminars, tutorials, workshops and other contact time) are approximate and may include in-class tests where one or more of these are an assessment on the module. In-class tests are scheduled/organised separately to taught content and will be published on to student personal timetables, where they apply to taken modules, as soon as they are finalised by central administration. This will usually be after the initial publication of the teaching timetable for the relevant semester.
Reading list for ELECTRICAL MACHINES AND POWER SYSTEMS : http://aspire.surrey.ac.uk/modules/eee3038
The assessment is by examination (80%) and coursework design exercise (20%)
Programmes this module appears in
|Electronic Engineering BEng (Hons)||2||Optional||A weighted aggregate mark of 40% is required to pass the module|
|Electrical and Electronic Engineering BEng (Hons)||2||Compulsory||A weighted aggregate mark of 40% is required to pass the module|
|Electronic Engineering with Nanotechnology BEng (Hons)||2||Compulsory||A weighted aggregate mark of 40% is required to pass the module|
|Electronic Engineering with Nanotechnology MEng||2||Compulsory||A weighted aggregate mark of 40% is required to pass the module|
|Electronic Engineering with Space Systems BEng (Hons)||2||Optional||A weighted aggregate mark of 40% is required to pass the module|
|Electronic Engineering with Space Systems MEng||2||Optional||A weighted aggregate mark of 40% is required to pass the module|
|Electrical and Electronic Engineering MEng||2||Compulsory||A weighted aggregate mark of 40% is required to pass the module|
|Electronic Engineering MEng||2||Optional||A weighted aggregate mark of 40% is required to pass the module|
Please note that the information detailed within this record is accurate at the time of publishing and may be subject to change. This record contains information for the most up to date version of the programme / module for the 2021/2 academic year.