RF AND MICROWAVE FUNDAMENTALS - 2023/4
Module code: EEE3033
Module Overview
Expected prior learning: None
Module purpose: Radio frequency (RF) and microwave engineers require proficiency in a specific set of skills to in electronic circuitry that does not exist for other typical applications. Therefore, a good grounding in the electronics associated with RF and microwave devices and important underlying essential fundamentals are delivered for any form of RF or microwave engineering. The module will be important for other RF related modules such as EEEM044 RF System and Circuit Design and EEEM064 Microwave Design Techniques
Module provider
Computer Science and Electronic Eng
Module Leader
BROWN Tim (CS & EE)
Number of Credits: 15
ECTS Credits: 7.5
Framework: FHEQ Level 6
Module cap (Maximum number of students): 18
Overall student workload
Independent Learning Hours: 38
Seminar Hours: 9
Tutorial Hours: 11
Laboratory Hours: 12
Guided Learning: 20
Captured Content: 60
Module Availability
Semester 1
Prerequisites / Co-requisites
None.
Module content
Content
- Transmission line theory, S-parameters and two port networks, pulse filtering
- Smith charts and impedance matching.
- RF filter design and characteristics.
- Antenna theory and propagation in free space.
- Low noise amplifier design and noise source calculations.
- RF receiver design, superhet receivers.
- Case study: radio deployment in pulse and carrier wave radar.
- Laboratory experimentation with low noise amplifiers and CAD-based design laboratories based on the indicative content of the module.
Assessment pattern
| Assessment type | Unit of assessment | Weighting |
|---|---|---|
| Coursework | Laboratory and Written Report | 20 |
| Examination | Examination - 2 hours | 80 |
Alternative Assessment
N/A
Assessment Strategy
The assessment strategy for this module is designed to provide students with the opportunity to demonstrate their competence in explaining and using fundamentals of RF and microwave in practical test and measurement, simulation of RF circuits and problem solving tasks for real life applications. This is therefore tested in real life hands on practical and computer aided design (CAD) simulation laboratories. The examination includes both testing the knowledge and understanding of fundamentals in RF and microwave, while also it includes problem solving tasks in designing and deploying radio receivers.
Thus, the summative assessment for this module consists of the following.
- Submitted coursework will be undertaken relating to the flipped classes, CAD laboratory sessions and one practical laboratory session. The marks make up 20% of the module mark
- A two-hour, closed-book written examination where there is a choice of three questions to answer out of the four available questions. The marks from this examination contribute 80% of the module mark.
Any deadline given here is indicative. For confirmation of exact dates and times, please check the Departmental assessment calendar issued to you.
Formative assessment and feedback
For the module, students will receive formative assessment/feedback in the following ways.
- During lectures, by examples
- During lectures, by peer instruction
- During tutorials
- During supervised laboratory sessions
- During supervised computer laboratory sessions
- Via assessed coursework
Module aims
- Students will gain knowledge of the fundamentals in designing RF and microwave circuits, hands on experience of RF test and measurement as well as gain appreciation for the practical challenges in building such circuits.
- The module also aims to provide opportunities for students to learn about the Surrey Pillars listed below.
Learning outcomes
| Attributes Developed | Ref | ||
|---|---|---|---|
| 001 | Explain and use parameters for measuring the performance of RF devices including S-parameters and the decibel scale | K | C1 |
| 002 | Explain the function of components in RF devices including chokes and blocking capacitors | KC | C2 |
| 003 | Design simple, and simulate using computer aided design software, selected RF circuits | KCPT | C3,C5 |
| 004 | Experimentally measure, and report in written form, the characteristics of selected RF circuits | PT | C12, C16, C17 |
Attributes Developed
C - Cognitive/analytical
K - Subject knowledge
T - Transferable skills
P - Professional/Practical skills
Methods of Teaching / Learning
The learning and teaching strategy is designed to achieve the following aims:
- To build knowledge in the fundamentals and use of RF and microwave theory including scattering parameters, Smith charts, RF propagation and noise.
- To apply the knowledge of the fundamentals in designing passive circuits including filters and transmission lines.
- To use the knowledge of the fundamentals within active RF electronics in designing transistor radio receivers but also integrating them into the receiver system design.
- To realise the application of fundamentals in RF and microwave in undertaking hands on practical test and measurement tasks as well as designing RF circuits in computer aided design (CAD) simulations.
Learning and teaching methods include the following:
EEE3033 – Short Course Version
Thus, the summative assessment for this module consists of the following.
- A two-hour, closed-book written examination. The marks from this examination contribute 100% of the module mark.
Learning and teaching methods include the following.
- Short course delivery 30 hours x 1 week. Delivered as a short course including laboratory sessions, with an approach to continuing professional development.
- Distance learning material provided online after the course to work through and to use the knowledge in the context of professional experience.
- Tutorials can be arranged with the module leader ad-hoc either online or in person to hone and apply the knowledge further beyond the delivery of the short course.
EEE3033 – Main Version
Thus, the summative assessment for this module consists of the following.
- A two-hour, closed-book written examination. The marks from this examination contribute 80% of the module mark.
- Submitted coursework consisting of two reports, the first written up and submitted following the first two labs sessions in the semester, while the second is written up and submitted following the final two lab sessions. The marks make up 20% of the module mark
Learning and teaching methods include the following.
- Delivery of online content x 9 weeks with the intention of enabling students to form their learning at their own pace by having material delivery split into separate tasks.
- 1 hour seminar x 9 weeks with the intention to provide narrative to the learning delivered online and inspiration on real live applications of the knowledge.
- 1 hour tutorial x 11 weeks with the intention to provide formative feedback through a ‘flipped class’ approach.
- 3 hours laboratories x 4 weeks with active hands on CAD simulation or practical test and measurement.
Indicated Lecture Hours (which may also include seminars, tutorials, workshops and other contact time) are approximate and may include in-class tests where one or more of these are an assessment on the module. In-class tests are scheduled/organised separately to taught content and will be published on to student personal timetables, where they apply to taken modules, as soon as they are finalised by central administration. This will usually be after the initial publication of the teaching timetable for the relevant semester.
Reading list
https://readinglists.surrey.ac.uk
Upon accessing the reading list, please search for the module using the module code: EEE3033
Other information
This module has a capped number and may not be available to international exchange students. Please check with the International Engagement Office email: ieo.incoming@surrey.ac.uk
This module has a capped number and may not be available to ERASMUS and other international exchange students. Please check with the International Engagement Office email: ieo.incoming@surrey.ac.uk
Sustainability – Students will grasp some fundamental elements of low noise receivers and antennas that will improve the ability of a radio receiver from which coverage is improved with lower energy consumption. Furthermore it will show how low cost receiver solutions can enable communication to be improved in remote areas that can provide sources of information and education to disadvantaged areas of the world, which could in turn have a role in the improvement of economy and lowering of poverty.
Digital capabilities – RF engineering requires competence in using design simulators. In this module there are laboratories dedicated to using cutting edge computer aided design (CAD) for RF circuits. Students will have opportunity to learn the fundamentals of designing and testing passive devices and low noise amplifiers with the simulation tool. It will include skills in using the Smith chart, to aid in both designing RF circuits to optimise performance.
Employability – Students will have a strong grasp of fundamentals of RF and Microwave including the use of the decibel scale, scattering parameters and Smith charts at an elementary level. These will be key attributes for a graduate engineering going into an RF and microwave engineering environment. Some experience of hands on RF test and measurement in the laboratory sessions will strengthen these skills that need to be readily used in a real work environment for an RF engineer.
Resourcefulness and resilience - Students will build competence in the knowledge of RF receivers and circuits in order to apply these to design and problem solving in the assessment. This is evidenced in the exam where they will be set design tasks for RF circuits and be required to use actual metrics. Secondly in the assignments set these will involve writing up results obtained by test and measurement but also use of cutting edge computer aided design where they need to interpret and use results using important parameters recognised by the RF engineering community.
Programmes this module appears in
| Programme | Semester | Classification | Qualifying conditions |
|---|---|---|---|
| Electronic Engineering BEng (Hons) | 1 | Optional | A weighted aggregate mark of 40% is required to pass the module |
| Electrical and Electronic Engineering BEng (Hons) | 1 | Optional | A weighted aggregate mark of 40% is required to pass the module |
| Electronic Engineering with Nanotechnology BEng (Hons) | 1 | Optional | A weighted aggregate mark of 40% is required to pass the module |
| Electronic Engineering with Nanotechnology MEng | 1 | Optional | A weighted aggregate mark of 40% is required to pass the module |
| Electrical and Electronic Engineering MEng | 1 | Optional | A weighted aggregate mark of 40% is required to pass the module |
| Electronic Engineering MEng | 1 | Optional | A weighted aggregate mark of 40% is required to pass the module |
| Nanotechnology and Renewable Energy MSc | 1 | Optional | A weighted aggregate mark of 40% is required to pass the module |
| Electronic Engineering MSc | 1 | Optional | A weighted aggregate mark of 40% is required to pass the module |
| RF and Microwave Engineering MSc | 1 | Optional | A weighted aggregate mark of 40% is required to pass the module |
| Electronic Engineering with Computer Systems MEng | 1 | Optional | A weighted aggregate mark of 40% is required to pass the module |
| Electronic Engineering with Computer Systems BEng (Hons) | 1 | Optional | A weighted aggregate mark of 40% is required to pass the module |
Please note that the information detailed within this record is accurate at the time of publishing and may be subject to change. This record contains information for the most up to date version of the programme / module for the 2023/4 academic year.