NANOFABRICATION AND CHARACTERISATION - 2023/4
Module code: EEEM050
Expected prior learning: None specifically advised.
Module purpose: Introduction to experimental techniques and practical skills in nanotechnology, nanoelectronics and nanoscale device fabrication. Introduction to fundamental research skills.
Computer Science and Electronic Eng
STOLOJAN Vlad (Elec Elec En)
Number of Credits: 15
ECTS Credits: 7.5
Framework: FHEQ Level 7
JACs code: H611
Module cap (Maximum number of students): N/A
Overall student workload
Independent Learning Hours: 110
Lecture Hours: 17
Seminar Hours: 3
Tutorial Hours: 10
Guided Learning: 8
Captured Content: 2
Prerequisites / Co-requisites
Indicative content includes the following:
1. Data and image processing and analysis
- Experimental and statistical errors.
- Image and data processing and analysis.
- Automated particle analysis.
- Paper/article search skills and referencing software.
2. Design of Experiments
- Principles of experimental design.
- Factorial design.
- Taguchi method.
- ANOVA (analysis of variance).
3. Optical Microscopy and Spectroscopy
- Optical and 3D optical microscopies.
- UV-Vis-NIR, FTIR and luminescence spectroscopies.
- Raman spectroscopy.
4. Nanostructure growth and deposition
- Chemical Vapour Deposition growth of nanostructures.
- Solution processing of nanostructures.
- Models for the growth of nanostructures.
5. Surface characterisation and electrical properties
- Atomic Force Microscopy and related surface analysis techniques.
- X-ray photoelectron spectroscopy.
- Electrical measurements at the nanoscale.
6. Surface characterisation with Ion Beams
- Introduction to ion implantation in electronics.
- Ion Beam analysis.
- Thin film characterisation.
7. Micro and Nano -Electromechanical Systems: Principles and Fabrication
- Fundamentals of MEMS and NEMS design and processing, use in sensors, microsystems technology and applications.
- Applications and technology generated based on scaling and implementation of NEMS/MEMS.
- Key drivers associated with developing new technologies and the development of next generation NEMS devices.
|Assessment type||Unit of assessment||Weighting|
|Examination Online||4HR Online (open book) EXAM||100|
Not applicable: students failing a unit of assessment resit the assessment in its original format.
The assessment strategy for this module is designed to provide students with the opportunity to demonstrate the following:
· The practical analysis of data, including specifically error estimation and derivation.
· Application of design of experiments concepts to planning research strategies.
· The understanding of the wider scope of a specific piece of research, through literature review
· The graphical representation of results and analysis, including the understanding the role of figure captions.
· The ability to understand the fundamental theory behind major experimental techniques used in nanotechnology and fabrication and apply it to case studies and examples.
· A general understanding of the achievements and challenges facing the next generation of nanoscale devices.
Thus, the summative assessment for this module consists of the following:
EXAM only: written examination
Any deadline given here is indicative. For confirmation of exact dates and times, please check the Departmental assessment calendar issued to you.
Formative assessment and feedback
For the module, students will receive formative assessment/feedback in the following ways.
· During lectures, by question and answer sessions
· During tutorials/tutorial classes
· By means of unassessed tutorial problem sheets (with answers/model solutions)
- Introduce students to common analytical experimental techniques used in nanoelectronics and nanotechnology, such as: 1) optical microscopy (eg. confocal) and spectroscopies (eg. Raman); 2) scanning probe microscopy (Atomic Force Microscopy and its variants); 3) ion, X-ray and electron beam spectroscopies (eg. Rutherford Backscattering, Energy-dispersive X-ray); 4) electrical measurements on the nanoscale.
- Provide practical experience in analysing data and measurement errors. Provide practical experience in Design of Experiments approaches.
- Provide some of the soft skills used in communicating research results, such as literature searching, use of referencing database, producing journal-quality figures and presenting results.
- Introduction to electronics and electro-mechanical fabrication techniques (lithography, printing).
- Introduction to nanomaterials fabrication techniques (eg. growth of graphene, nanotubes and nanowires, deposition of thin films)
|001||To apply the fundamental theory of basic experimental characterisation to examples and case studies in nanoelectronics and nanotechnology.||KC|
|002||To critically analyse experimental data and present to an audience, in publication-quality format||KCPT|
|003||To critically analyse and interpret information gained from scientific journals.||KCT|
C - Cognitive/analytical
K - Subject knowledge
T - Transferable skills
P - Professional/Practical skills
Methods of Teaching / Learning
The learning and teaching strategy is designed to achieve the following aims.
The course covers some of the fundamentals behind nanotechnology and moves on to discuss their practical implementation in nanoscience and quantum engineering, nanomaterials and nanotechnology, before discussing future trends and applications. Coupled with this, the course teaches some of the basics of scientific communication, from literature review to the design and planning of publication-quality images and figures, to the presentation of data. It also strengthens the some of the basic mathematical skills necessary for data analysis and introduces design of experiment approaches.
Learning and teaching methods include the following.
• Online taught material and class discussions: 19 hours
• Tutorials and formative feedback sessions: 11 hours
• dedicated revision sessions: 3 hours
Indicated Lecture Hours (which may also include seminars, tutorials, workshops and other contact time) are approximate and may include in-class tests where one or more of these are an assessment on the module. In-class tests are scheduled/organised separately to taught content and will be published on to student personal timetables, where they apply to taken modules, as soon as they are finalised by central administration. This will usually be after the initial publication of the teaching timetable for the relevant semester.
Upon accessing the reading list, please search for the module using the module code: EEEM050
Programmes this module appears in
|Electronic Engineering with Nanotechnology MEng||1||Compulsory||A weighted aggregate mark of 50% is required to pass the module|
|Electronic Engineering MEng||1||Optional||A weighted aggregate mark of 50% is required to pass the module|
|Electronic Engineering with Professional Postgraduate Year MSc||1||Optional||A weighted aggregate mark of 50% is required to pass the module|
|Electronic Engineering MSc||1||Optional||A weighted aggregate mark of 50% is required to pass the module|
|Nanotechnology and Renewable Energy MSc||1||Compulsory||A weighted aggregate mark of 50% is required to pass the module|
Please note that the information detailed within this record is accurate at the time of publishing and may be subject to change. This record contains information for the most up to date version of the programme / module for the 2023/4 academic year.